Quality Parameter Master

Quality Parameter Master

The Quality Parameter Master serves as the foundation for all material inspection and quality assurance activities across the system. It defines the discrete test criteria—both physical measurements with numeric tolerances and qualitative visual checks—that items are evaluated against during Quality Control inspections.

ℹ️
Navigation: Access this setup screen via Quality Control > Masters > Quality Parameter (/qualityparameterindex).

📐 Parameter Types & Tolerance Architecture

Every inspection parameter falls into one of two distinct categories:

flowchart TD
    Param["Quality Parameter"] --> TypeCheck{"Parameter Type"}
    
    TypeCheck -->|System Type| Numeric["Numeric Measurement (e.g., Tensile, Hardness, Dimension)"]
    Numeric --> Range["Enforce Min & Max Limits (0 to 9999.999)"]
    Range --> AutoGrade["Automated Pass/Fail Grading during QC"]
    
    TypeCheck -->|User Type| Qualitative["Visual / Qualitative Check (e.g., Color, Surface Finish)"]
    Qualitative --> Binary["Binary Verdict: Pass (P) or Fail (F)"]
    Binary --> ManualGrade["Inspector Judgment Input"]

1. System Parameters (Numeric Tolerances)

  • Used for measurable physical, chemical, or dimensional characteristics (e.g., Diameter, Hardness Rockwell C, Tensile Strength).
  • Tolerance Limits: Require entering a Minimum Value and a Maximum Value formatted up to three decimal places (0.000 to 9999.999).
  • Automated Grading: During QC inspection, any reading where $\text{Min} \le \text{Actual Reading} \le \text{Max}$ automatically receives a Pass verdict; readings outside this range are immediately marked Fail.

2. User Parameters (Qualitative Attributes)

  • Used for attributes that require visual or tactile assessment rather than continuous measurement (e.g., Surface Finish Uniformity, Label Legibility, Odor/Color).
  • Zero Value Lock: For User parameters, the system automatically mandates and locks both Minimum Value and Maximum Value to 0.
  • Verdict: Inspectors directly input P for Pass or F for Fail during inspection.

🛠️ Step-by-Step Parameter Setup

Creating a New Parameter

  1. Navigate to Quality Parameter and click Create New.
  2. Parameter Name: Enter a descriptive name for the test metric (up to 100 characters). Must be unique across the system.
  3. Parameter Type: Select System or User.
  4. Min Value / Max Value (Visible for System type):
    • Enter the acceptable engineering lower limit (Min Value).
    • Enter the acceptable engineering upper limit (Max Value).
  5. Click Save. The system automatically generates a unique 6-digit Parameter Code.

📥 Bulk Importing Parameters via Excel

To accelerate system onboarding, you can bulk import hundreds of quality parameters using a standardized Excel template:

Download Import Model

From the Quality Parameter index, click Import, then click Download Model. This downloads QualityParameter_Model.xlsx containing the exact column structure and an instructions sheet.

Populate Parameter Data

Fill in your company’s inspection standards into the spreadsheet:

  • Parameter Name: Descriptive name (up to 100 characters).
  • Parameter Type: S for System (numeric) or U for User (qualitative).
  • Min Value / Max Value: Acceptable limits for System parameters (0 for User parameters).

Upload & Run Automated Diagnostics

Upload the completed spreadsheet (ImportQualityParameter.xlsx). The system parses every row and generates a detailed diagnostic workbook if any issues are detected:

  • Structural Integrity: Rejects altered columns or missing headers.
  • Format Errors: Flags invalid numbers or out-of-range limits with specific error codes (Z1 through Z8).
  • Logical Conflicts: Flags duplicate parameter names (Code A) or inverted tolerances where Minimum exceeds Maximum (Code B).

Successful Creation

Valid rows are immediately saved as active parameters, assigned automated parameter codes, and made available for Test Plan creation.


🔒 Critical Business Validations & Rules

Validation RuleConditionSystem Behavior
Duplicate Name PreventionParameter name already exists in the systemRejection: “Parameter Name already exists”. Prevents confusing duplicate definitions.
Tolerance Range Inversion GuardMin Value is greater than Max ValueRejection: “Min Value cannot be greater than Max Value”.
System Boundary ValidationMin Value $< 0$ or Max Value $< 0.001$ or either $> 9999.999$Rejection: Enforces valid numeric bounds between 0 and 9999.999.
User Type Zero EnforcementMin or Max Value is non-zero for User parameter typeImport validation codes Z7 / Z8 reject qualitative parameters with non-zero tolerances.
Downstream Usage Delete LockParameter is linked to an existing Test Plan or historical QC inspectionHard block: The system verifies downstream records and prevents deletion to preserve historical quality audit trails.
Parameter ReactivationA deactivated parameter needs to be reinstatedDeactivated records display a Reactivate button on the details screen to restore active status without re-entry.

💡 Best Practices